Sun Microsystems Sun StorEdge T3, Installation, Operation And Service Manual

Page: 101 / 148

Chapter 4 Troubleshooting 4-7
4.1.4.3 Interconnect Card LEDs
Each interconnect card has a status LED for each interconnect cable.
TABLE 4-3
lists
the possible interconnect card status LED states with descriptions of each state.
FIGURE 4-3
Interconnect Card LEDs
Note – See Chapter 5 for instructions on how to service a failed interconnect card.
TABLE 4-3
Interconnect Card LED Descriptions
Interconnect Card
Status LED
(green or amber)
Description
Off • Interconnect card not installed (not recognized)
Green-solid • Interconnect card OK
• Cable OK (if present)
Green-slow blink • Interconnect card OK
• Cable bad; OK to replace cable
Amber-solid • Interconnect card firmware download in progress
Amber-slow blink • Interconnect card failure; OK to replace interconnect card
Note—Verify an interconnect card or cable failure using the
CLI or Component Manager.
LED 1 LED 2
Interconnect
Interconnect card 2 LED 1 LED 2
card 1