Sun Fire V60x and Sun Fire V65x Server Release Notes
5
SCSI Support
■
The Adaptec adpu320 driver does not support any Adaptec Ultra/320 PCI add-on
cards. Other add-on SCSI cards are supported if they are listed on the Sun
hardware compatibility list (HCL). You can find the HCL at:
http://soldc.sun.com/support/drivers/hcl/
■
You may encounter issues when booting from internal SCSI drives when an
external SCSI device or an external SCSI array has been added. To boot the system
using internal drives, the SCSI BIOS settings may need to be modified for each
channel using the following procedure.
Modifying the SCSI BIOS Settings
1. To access the SCSI BIOS settings, press Ctrl+A (at POST, during the SCSI
initialization phase).
2. Once in the SCSI BIOS, select External Channel A AIC-7902 A slot at 00:04:07:00.
Select the following options:
■
Configure/View SCSI Controller Settings
■
Advanced Configuration
3. In the Advanced Configuration menu, go to SCSI Controller Int 13 Support.
Select one of the Disabled options.
Note –
If you select the Disabled option, you will disable the rear SCSI port. If you
select the Selecting Disabled: With Scan option, the rear SCSI port will remain
available.
4. In the SCSI BIOS settings screen, select Internal Channel B AIC-7902 B at slot
00:04:07:01.
Select the following options:
■
Configure/View SCSI Controller Settings
■
Advanced Configuration
5. In the Advanced Configuration menu, go to SCSI Controller Int 13 Support.
Select the Enabled option if it is not already selected.
6. Save the settings before exiting the menu.
