Sun Microsystems Sun Fire V1280, Installation Manual

Page: 28 / 64

1-16 Sun Fire V1280/Netra 1280 Systems Installation Guide • May 2006
3. Lift the system off of the wooden shipping pallet and remove the pallet.
4. Extend the outer slides from the cabinet and latch them in the extended position.
5. Lift the system until it is level with the outer slides on the cabinet.
6. Carefully move the lifting device forward until the slides on the system are fully
engaged with the outer slides on the cabinet
(
FIGURE 1-9
).
The latches on each side must click out, locking the slides.
FIGURE 1-9
Aligning the Slides
Inner slides
Outer slides