5
9. Pull the Sun Fire V1280/Netra 1280 system out of the cabinet until the slides lock
into the fully extended position.
10. Raise the shipping cradle up to the system (
). Orient the front of the
shipping cradle with the front of the system.
This orientation allows the upper captive screws on the handles to align with the
mounting holes that are on the sides of the system.
Note –
If you use a mechanical lifting device, insert the forks of the lifting device
fully through the shipping cradle opening to provide maximum support.
FIGURE 4
Positioning the Shipping Cradle
11. Slide the shipping cradle handles inward until they contact the sides of the
system (
). Tighten all eight captive screws.
If necessary, reposition the system on the cradle to align the captive screws with the
corresponding holes.
Caution –
Do not place the full weight of the system on the shipping cradle until
you have secured all eight screws.
