Sun Microsystems Sun Fire 12K, Site Planning Manual

Page: 51 / 100

Chapter 4 Network Planning 4-7
4.4.2.1 I1 Network
Host names and IP addresses are required for the I1 network. For the System
Controller, only one host name and IP address is assigned to the I1 network. Only
the main SC actively connects to the I1 network.
The host names and IP addresses can be automatically assigned by
smsconfig
(1M)
during installation. For example, if the platform name is Name1, domain A I1 host
name becomes Name1-a. IP assignments are made based on the IP network subnet
mask provided from lowest to highest starting with the SC and ending with
domain R.
Note –
Automatic assignment of a host name IP address for the I1 network is highly
suggested.
If performing a manual installation, record the host names and IP addresses for the
I1 interfaces in the worksheet provided in
TABLE 4-5
.
TABLE 4-5
Host Name IP Addresses for the I1 Network Worksheet
I1 Network
Interface Host Name IP Address
System Control board (SC-I1) platform -sc-i1
Domain A (DA-I1) platform -a
Domain B (DB-I1) platform -b
Domain C (DC-I1) platform -c
Domain D (DD-I1) platform -d
Domain E (DE-I1) platform -e
Domain F (DF-I1) platform -f
Domain G (DG-I1) platform -g
Domain H (DH-I1) platform -h
Domain I (DI-I1) platform -i
Domain J (DJ-I1) platform -j
Domain K (DK-I1) platform -k
Domain L (DL-I1) platform -l
Domain M (DM-I1) platform -m
Domain N (DN-I1) platform -n
Domain O (DO-I1) platform -o
Domain P (DP-I1) platform -p