Opening the Sun Cobalt Control Station
Upgrading the Hardware—Sun Cobalt Control Station
3
Figure 1.
Rear view of the Sun Cobalt Control Station
1.
The
Security lock hole
is used to lock the unit to a secure location.
2.
The
Cooling fans
maintain proper operating temperature. Ensure that the
ventilation holes are not blocked.
3.
The
USB port
provides a Universal Serial Bus (USB) connection.
4.
The
SCSI connector
enables a Small Computer System Interface (SCSI)
connection for connecting such devices as hard disk drives.
5.
The
Network status indicators/OK to Power Off
signal network activity
and information. The
OK to Power Off light
flashes when it is safe to turn
the power off.
6.
The
Serial console port
allows you to connect serial devices.
7.
The
Serial connector
allows you to connect a UPS to the serial port for
Smart UPS support.
8.
The
PCI expansion slot
provides space for adding a PCI card.
The
Network connectors
enable ethernet network connections and accept
the 10/100 BaseT network cables.
9.
Network connection 2
.
10.
Network connection 1
.
11.
Cooling fan
.
12. The
Power switch
toggles the power on or off.
13. The
Power socket
receives the AC cord that is provided.
100 - 240 VAC 50/60 Hz
1.4 A 60W max
Cobalt Networks and Cobalt RaQ are
trademarks of Cobalt Networks, Inc.
www.cobalt.com
P/N 550-00135-01
Link
Tx/Rx
Link
Tx/Rx
3
4
6
7
2
8
9
5
1
10
11
12
13
