Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
Installing a Rack Mount Library
17
Figure 10 Securing the
Library to the Rack
7
Insert a no. 2 POZIDRIV screwdriver into one of the holes and turn
the rack mount clamp screw clockwise to tighten it fully.
As you tighten this screw, a lever protrudes from the side of the
library and presses against the back side of the rack rail.
8
Tighten the remaining rack mount clamp screw in the same
manner.
9
Press the white button next to the right magazine access door.
The right magazine access door opens.
10
Repeat steps
through
to secure the right side of the library to
the rack.
11
Close the magazine access doors.
Caution:
Do not overtighten the rack mount clamp screw.
When the screw begins to feel tight, turn it an
additional quarter turn and then stop.
Magazine
access doors
Access holes
for the rack
mount clamp
screws
