Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
Installing a Rack Mount Library
15
Installing the Library
in the Rack
0
This section explains how to install the library in the rack. You will
need a no. 2 POZIDRIV screwdriver for this procedure.
Installing an L25 Library
0
To install an L25 library in a rack:
1
Take precautions to ensure that the rack is stable:
• If you are installing the library at the top of a rack with no
equipment at the bottom of the rack, purchase a rack
stabilization kit from the rack manufacturer and install it before
installing the library.
• If you are installing the library in a rack with other equipment,
place the heaviest equipment at the bottom of the rack.
2
Verify that the rack mount shelves are level and securely fastened
to the rack.
3
With the help of another person, lift the library onto the rack
mount shelves.
4
Slide the library all the way into the rack.
5
Press the white button next to the left magazine access door and
open the door.
6
Notice the hole behind the magazine access door, at the lower edge
of the library (see
This hole provides access to the rack mount clamp screw.
Figure 9 Securing the L25
Library to the Rack
Caution:
The L25 library weighs approximately 58 lbs (26.5
kg). At least two people are required to lift and install
the library.
Magazine
access door
Access hole for
rack mount
clamp screw
