Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 87 / 146

Chapter 7 Service 7-11
7.2.4 Interface Board
Note –
If you are installing a second interface board, use a Phillips screwdriver to
remove the screws securing the spacer to the interface board slot. Remove the spacer
and install the interface board (
FIGURE 7-6
).
1. Disconnect the fiber optic cable(s) (see Section 7.2.2).
2. Use a Phillips screwdriver to remove the screws.
3. Remove the interface board (
FIGURE 7-6
).
Press the ejection levers outward to free the interface board from the chassis.
FIGURE 7-6
Removing an Interface Board
4. Replace the interface board.
5. Reconnect the fiber optic cable(s).
Ejection
lever