Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 71 / 146

Chapter 6 LED Indicators 6-3
6.2 Interface Board and GBIC
The interface board and GBIC LEDs are located on the interface board.
FIGURE 6-3
Interface Board and GBIC LEDs
TABLE 6-1
GBIC LEDs
Ready Fault Indication Corrective Action
Okay None
Fault in link to GBIC
Fault in source to link Verify link is installed and unbroken.
Verify link source is operating.
N/A Fault in GBIC Replace GBIC. See Section 7.2.3 “GBIC”
on page 7-9.
GBIC not installed
No power to GBIC
GBIC is incompletely inserted Install GBIC if required.
Verify system power is on.
Reinsert GBIC.
On Off
TABLE 6-2
Interface Board LEDs
Ready Fault Indication Corrective Action
Okay None
Fault condition Replace the Interface Board. See
Section 7.2.4 “Interface Board” on
page 7-11.
On Off
Interface board fault
Interface board ready
GBIC ready
GBIC fault
GBIC ready
GBIC fault