Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 152 / 176

12-10 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
For additional information on adding disks to the Sun StorEdge 6020 arrays, refer to
Chapter 6 of the Sun StorEdge 6020 and 6120 Arrays System Manual.
1. Remove the blank spacer from the Sun StorEdge 6020 array from the desired slot.
2. Insert the new disk and lock it in place.
Note – You must wait one minute after inserting the new disk into the tray before
proceeding to Step 3 to allow time for the system to update the internal states.
3. On a server, bring up the Storage Automated Diagnostic Environment in your web
browser.
4. Enter the user name and password.
5. Create a new system inventory snapshot.
Select Manage
→
Service
→
Inventory Maintenance and click Generate New
Inventory. Once the inventory is generated, click Save Inventory.
Note –
By generating a new inventory with the added disk, you can immediately
see if the disk is recognized by the system.
12.5 Adding One or More Sun StorEdge 6020
Arrays
1. Note the MAC address of the new array.
The MAC address for the Sun StorEdge 6020 array is a 12-digit number that is
printed on the label on the back of the array.
Tip –
Refer to Sun StorEdge 6020 and 6120 Arrays Installation Guide for instructions
about how to locate the MAC address.
https://
hostname
:7443/
User Name: admin
Password: !admin