Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 101 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-31
5.3.10.5 Listing the Initiator Group
This command displays information about one or more initiator groups. The
sscs
list initgroup
command-line syntax is shown below.
5.3.10.6 Listing the Jobs
This command displays information about jobs by status (current (outstanding) or
completed) or by job identification number. The command lists all jobs if you do not
specify any options.The
sscs list jobs
command-line syntax is shown below.
You specify true to display these jobs and specify false to prevent the job list from
being displayed.
5.3.10.7 Listing the Log Messages
This command displays log messages for the software. If you do not specify any
options, all log messages are displayed. The command lists all jobs if you do not
specify any options.The
sscs list log
command-line syntax is shown below.
# sscs list -a
array-name
initgroup [
wwn1
,
wwn2
, ...]
# sscs list [-o,--outstanding [ true | false ] |
-c,--completed [ true | false ] ] [-i,--job-id
job-id
] jobs
# sscs list
[ [
-s
|
-f { [
mmdd
]
HHMM | mmddHHMM
[
cc
]]
yy } [
.
SS
] ]
[-t
number]
log