Sun Microsystems StorageTek TIMBERWOLF 9740, Hardware Operator'S Manual

Page: 36 / 100

Operating the LSM in Automated Mode
3-4 Revision P 95693
Ejecting Cartridges through the CAP
Refer to your specific software publications for instructions about having the
robot insert the desired cartridges into the CAP.
To eject cartridges through the CAP:
1. Enter the VOLSERs of the cartridges you want ejected at the operator
console. The robot will retrieve them and insert them into the CAP.
2. If the operator panel displays
ONLINE CAP UNLK DISABLD
, the CAP is
locked by the host. Issue the command at the operator console to change
the LSM to the
ONLINE - PRESS EXE TO UNLK CAP
mode.
3. When the operator panel displays
ONLINE - PRESS EXE TO UNLK CAP
,
press
EXECUTE
on the operator panel.
a. The operator panel displays
ONLINE CAP UNLK PENDING
.
b. The hand unlocks the CAP.
c. The operator panel displays
ONLINE CAP UNLOCKED
.
4. Open the CAP to gain access to the cells.
5. Remove the cartridges and store them outside the LSM, or
6. Remove the magazine from the CAP, remove the cartridges from the
magazine, and store them outside the LSM.
7. Close the CAP. The lock automatically engages.
8. Repeat these steps until the robot has inserted all of the desired cartridges
into the CAP and you have removed them.