6
Sun Secure Application Switch – Release Notes for v3.2.1 • August 2007
Both systems are rackmountable and operate on standard AC voltages (115 or 230
VAC) in either redundant or non-redundant power configurations.
For a review of the Sun Secure Application Switch hardware, refer to the
Sun Secure
Application Switch – Getting Started Guide
.
Transceivers
Sun has tested the ports on the front of the system with the following transceivers,
which are listed by type, vendor, vendor part number, and Sun X Option number.
Fiber
■
FINSAR, FTRJ-8519P1 BNL, X2001A
■
FINSAR, FTLF-8519P2BCL, X2001AZ
■
FIBERXON, FTM-8012C-SLG, X2001AZ
Copper
■
FINSAR, FCMJ-8521-3, X2002A
■
FINSAR, FCLF8521-3, X2002AZ
■
FIBERXON, FTM-C012R-LMG, X2002AZ
You can use other transceivers, but only the ones listed above have been fully tested.
If required, you can purchase these transceivers from Sun or directly from approved
vendors.
Software Information
This software release (V3_2R1) works with both the N1000 Series and N2000 Series.
■
If you currently have 2.0 software on your switch, refer to the section,
“Migrating
From Software Version 2.0 to Version 3.2.1”
, for upgrade information.
■
If you currently have 3.0 or 3.1 software on your switch, refer to the section,
“Migrating From Software Version 3.0 or 3.1 to Version 3.2.1”
for upgrade
information.
