Cisco MDS 9513 Multilayer Director Hardware Release Notes
13
Downloading and Installing Patches
The following task provides instructions for downloading and installing patches for
the Cisco MDS 9513 director. See
“Firmware Requirements” on page 3
for the
required or recommended firmware versions and associated patch IDs.
1. Access the SunSolve web site at:
2. Read and accept the terms and conditions of the License Agreement.
3. From the Support category, select Patches and Updates.
4. Under PatchFinder, type the patch ID and click Find Patch.
Do not type the -xx revision number. PatchFinder automatically finds the latest
patch.
5. Verify you have retrieved the correct patch.
6. Print the page.
Printing this page also prints the patch README file, which contains installation
instructions, special instructions, special guidelines, and notes.
7. Download the patch by clicking on either HTTP or FTP as shown in the
following line:
Download Patch (
nn,nnn,nnn
bytes) HTTP FTP.
8. Click PatchFinder and repeat the process from Step 4 for each patch.
9. Install the patches.
When you have finished downloading all patches, install the patches by following
the instructions in each patch README file.
