Sun Microsystems PCI High Speed Page 37 User Manual Download

Page: 37 / 64

C H A P T E R

SunHSI Utilities

The SunHSI software includes the

hsip_init

hsip_loop

, and

hsip_stat

utilities. This chapter contains a short description of each utility. Refer to each man
page to get more information on the commands. Also see

“Viewing the Man Pages”

on page 41

This chapter includes the following topics:

■

“

hsip_init

Utility” on page 17

■

“

hsip_loop

Utility” on page 20

■

“

hsip_stat

Utility” on page 21

Note –

You need to be superuser (

root

) in order to run the

hsip_init

hsip_loop

, or

hsip_stat

utilities.

hsip_init

Utility

The

hsip_init

utility enables you to modify some of the hardware operating

modes common to synchronous serial lines. This modification is needed for the
operation of some communications packages and is useful in troubleshooting a link.
See the

hsip_init

(1M) man page for details.

The hsip_init utility includes options for T1 compatibility and operating modes. See

“T1 Compatibility Options” on page 18

and

“Operating Modes Options” on page 18

for information on these options.

Summary of Contents for PCI High Speed

































































Search results

Summary of Contents for PCI High Speed

Reviews:

Related manuals for PCI High Speed

Brands by name

Popular brands

Sun Microsystems PCI High Speed, User Manual

Search results

Summary of Contents for PCI High Speed

Reviews:

Related manuals for PCI High Speed

Brands by name

Popular brands