Sun Microsystems Netra, User Manual

Page: 83 / 180

ATM Administration 9-5
9
Classical IP Interface
▼
To Configure a Classical IP Interface
1. Select Network Connection Administration: ATM.
The ATM Administration page is displayed with configuration information
for each port.
2. Select Configure a Classical IP interface for the required ATM port.
An administration page for the selected interface is displayed.
3. Enter the information in the form using Table 9-3.
4. Restart the Netra server using System Administration: Restart and
Shutdown.
Table 9-3 Information for ATM Classical IP Interface
ARP Configuration The server or client ARP configuration. Standalone allows
a back-to-back configuration.
Choices: Server, Client, Standalone
ARP Server Prefix The 13-byte prefix of the ARP server switch. If the ARP
server is on the same switch as the Netra server, no entry is
required. If there is no entry in this field, the local switch
prefix is used.
•This field is required only when the ARP Configuration
field is set to Client.
ARP Server Address The 7-byte local portion of the ATM address of the ARP
server. If there is no entry in this field, the default local
server is assumed. (There are also 256 addresses reserved by
Sun: SUNMACSEL0-255.)
•This field must remain blank if the ARP Configuration
field is set to Standalone.
Remote Host Address The remote host address for the machine to which the Netra
server is connected. The remote host address and the host
address must be on the same subnet.
•This field is required only when the ARP Configuration
field is set to Standalone.
Host Address The host address for the network interface. This address
should be unique on the system.
Netmask The netmask address that determines the network with
which the host address is associated.
Example: 255.255.255.0