7
Restarting the LOM Watchdog Monitor
In the ‘Enabling the LOMlite2 Watchdog Process From Your Own Script or
Command’ section on page 65 of the Netra X1 Server User’s Guide, the
piocntl
command is referred to. This is incorrect. The correct command to use is
priocntl.
The correct default
priocntl
command is
priocntl -e -c RT lom -W on,40000,10000
Checking How Long the Server Has Been
Running
On page 41 of the Netra X1 Server User’s Guide, the
date
and
showdate
commands
are described. The manual tells you that these commands return the length of time
that has passed since the last system reset. In fact, the commands return how long it
is since the last time sync with the host. The correct text is as below:
●
To find out how long it is since the last time sync with the host, type:
or:
Making Serial Connections to the Server
In the Netra X1 Server User’s Guide, the “Contents of the Ship Kit” section on page 3
refers to part number 530-2961-01 for the serial cables. The correct part number is
530-2093-01. The “Connecting the Cables to the Server” section on page 16 should
contain the following information:
Note –
The Netra X1 server is supplied with shielded serial cables. Use only these
cables when making serial connections to the server.
lom> date
lom> showdate
