Sun Microsystems Netra t1 100, User And Administration Manual

Page: 24 / 154

2 Netra t1 User and Administration Guide • June 2000
The Netra t1 Model 100/105 System
The Netra t1 Model 100/105 computer system is a single-processor server designed
primarily for use by telecommunications carriers and internet service providers.
The Model 100 is powered by –48 VDC/–60 VDC supplies. The Model 105 is
powered by an AC supply. This is the only difference between the two models.
The Netra t1 has the following features:
■
Rack-mounting enclosure with single –48 VDC/–60 VDC (Netra t1 Model 100) or
AC (Netra t1 Model 105) power supply
■
Support for UltraSPARCIIi 360 MHz processor with 1 Mbyte cache or
UltraSPARCIIi 440 MHz processor with 2 Mbyte cache
■
Sockets accepting 64, 256 and 512 Mbyte memory cards in single-board, 2-stack,
or 4-stack configurations (giving a maximum of 1 Gbyte of memory)
■
One short (176 mm) 33 MHz, 32 bit, 5 VDC PCI card slot
■
Two 10/100 Mbps RJ-45 Ethernet ports
■
Console/Lights Out Management RJ-45 serial port
■
Second RJ-45 serial port
■
Support for up to two low-profile, 3.5 inch Fast-20 (UltraSCSI) disks
■
Low-profile ATAPI CD-ROM drive (this is an orderable hardware option, part
number: 595-5317-01)
■
External Fast-20 (UltraSCSI) 68-pin port
The Netra t1 is designed for rack mounting. Its components are housed in a casing
with the following dimensions:
■
Height: 44 mm (1.73 inches)
■
Width: 440 mm (17.3 inches)
■
Depth: 488.95 mm (19.25 inches)
■
Weight (when all option modules are installed): 10 kg (22 lb)
SysAdmin.book Page 2 Friday, March 30, 2001 2:38 PM