Sun Microsystems Netra 440, Service Manual

Page: 77 / 166

Chapter 4 Removing and Replacing Cold-Swappable Components 59
5. Pull the security post out of its position from in front of the system configuration
card (
FIGURE 4-5
).
FIGURE 4-5
Removing a System Configuration Card
6. Grasp the system configuration card with your fingers and pull it out of the
system.
Installing the System Configuration Card
1. Insert the system configuration card into the system configuration card reader,
which is at the left of the On/Standby button (
FIGURE 4-4
).
Orient the system configuration card so that the Sun logo is on the top of the card.
2. Insert the security post into its position in front of the system configuration card.
3. Close the system door.
4. Power on the system.
See “Powering On the System” on page 22 .
SCC