8
Sun Java Workstation W1100z and W2100z Getting Started Guide
• October
2004
Powering Off the Workstation
1. Save your data and close any open applications.
2. Read all of the following power-off options before powering off the workstation:
■
Power off the workstation by using the operating system shut down command or
menu option.
In most cases, this powers down the operating system, then turns off the power to
the workstation.
■
If the workstation power does not shut off through the operating system
command or this command is not available, press and release the power button
(location shown in
This initiates an orderly shutdown of the operating system and powers off the
workstation.
Note –
Use the options in the first two bullets whenever possible to avoid data loss.
■
If the workstation does not shut off, press and hold the power button for
approximately 4 seconds.
This shuts down the power to the workstation, but does
not
initiate an orderly
shutdown of the system. This method could result in data loss.
If the preceding options fail to power off the workstation, see “Troubleshooting” in
the
Sun Java Workstation W1100z and W2100z User Guide,
817-6585-
xx
, for more
options.
Note –
After powering off the workstation, wait at least four seconds before
powering on the workstation again.
