Sun Microsystems Fire X4540, Administration Manual

Page: 61 / 154

Chapter 5 Sun Fire X4500 Fault Management Architecture 47
Displaying Fault Statistics Using the
fmstat
Command
This section discusses statistics associated with the Fault Management Architecture.
The
fmstat
command displays statistical information about faults handled by the
FMA. The
fmstat
command can report statistics associated with the Solaris Fault
Manager.
In the example below, an event was received. A case is opened for that event and a
diagnosis is performed.
●
Check the event log by typing the
fmstat
command with
-v
for verbose
output. For example:
The following is a example of information that may display:
For detailed instructions on the
fmstat
command, refer to the
fmstat man
page .
# fmstat -v
CODE EXAMPLE 5-3
fmstat
Command Example
module ev_recv ev_acpt wait svc_t %w %b open solve memsz bufsz
cpumem-diagnosis 0 0 0.0 0.0 0 0 0 0 3.0 K0
cpumem-retire 0 0 0.0 0.0 0 0 0 0 0 0
eft 1 1 0.0 1191.8 0 0 1 1 3.3M 11K
fmd-self-diagnosis 0 0 0.0 0.0 0 0 0 0 0 0
io-retire 1 0 0.0 32.4 0 0 0 0 37b 0
syslog-msgs 1 0 0.0 0.5 0 0 0 0 32b 0