Sun Microsystems Fire X4540, Administration Manual

Page: 127 / 154

Chapter 12 Sun Fire X4540 Fault Management Architecture 113
Displaying Fault Statistics Using the
fmstat
Command
The
fmstat
command displays statistical information about faults handled by the
Fault Management Architecture (FMA). The
fmstat
command can report statistics
associated with the Solaris Fault Manager.
For more information, see the
fmstat
(1M) man page.
In the example below, an event is received. Then, a case is opened for that event and
a diagnosis is performed.
To display statistical information:
●
Check the event log by typing the
fmdump
command with
-v
for verbose
output. For example:
The following is a example of information that is displayed:
# fmstat -v
CODE EXAMPLE 12-3 fmstat
Command Example
module ev_recv ev_acpt wait svc_t %w %b open solve memsz bufsz
cpumem-diagnosis 0 0 0.0 0.0 0 0 0 0 3.0 K0
cpumem-retire 0 0 0.0 0.0 0 0 0 0 0 0
eft 1 1 0.0 1191.8 0 0 1 1 3.3M 11K
fmd-self-diagnosis 0 0 0.0 0.0 0 0 0 0 0 0
io-retire 1 0 0.0 32.4 0 0 0 0 37b 0
syslog-msgs 1 0 0.0 0.5 0 0 0 0 32b 0