Sun Microsystems Fire 6800, Manual

Page: 46 / 66

6-2 Sun Fire 6800 System and Sun Fire Cabinet Rackmount Placement Matrix • June 2003
This section contains hole assignments for Sun Fire 3800 system and the Sun Fire
4800 system mounted in the Sun Fire cabinet. Front and rear holes are the same
FIGURE 6-2
Sun Fire 3800 System Mounting Bracket Detail
Each bracket is labeled “RIGHT” or “LEFT”. The orientation is when viewed from
the front of the system.
Caution – The Sun Fire 4800 system must always have a 1/2 RU front metal filler
panel in the space above it. Empty space in the cabinet must be filled with filler
panels to prevent the recycling of heated, exhausted air from the rear of the system.
Filler panels range from 1 RU to 5 RU in size.
Note – (*) Indicates the key hole (#2 for 3800 system only) used for rail location.
See
FIGURE A-16
for power wiring diagram for
TABLE 6-1
..
TABLE 6-1
Sun Fire 4800/3800 Systems With One or Two Sun StorEdge D240 Media
Trays
Rack Hole Numbers Used
To Mount Rails Rack Holes To Mount
Device Used Rack
Units Available
Rack Units
RTU Rear *1, 7 3
RTU Front *10, 16 3
Sun Fire 4800 system 21, *24
*66, 68 18
Sun Fire 1/2 RUfiller panel 71 (tabs down)
Sun Fire 3800 system 74, *79 9
Slot
Key hole #2