15
C H A P T E R
3
Rackmounting the Brocade
SilkWorm 3900 Switch
The Brocade SilkWorm 3900 switch requires that the rails be mounted into a Sun
StorEdge 72-inch Expansion Cabinet or a Sun Rack 900/1000 equipment rack before
installing the switch. Each 3900 switch comes with a rackmounting kit.
The 3900 switch is 1.5 RU (rack unit) in height.
This chapter contains the following sections:
■
“Installing the Rails” on page 15
■
“Installing the Brocade SilkWorm 3900 Switch” on page 20
Note –
Some hardware in the rackmounting kit parts list might not be used in this
installation.
Installing the Rails
1. Separate the inner and outer slide rails for both slide assemblies by performing
the following steps.
a. Pull the inner slide rail out until the lock engages.
b. Depress the lock release lever that is located inside the inner slide rail, and pull
the inner slide rail out of the outer slide rail.
c. Repeat Steps a and b with the second slide assembly.