Enterprise Tape Library 4/1000 Installation Guide for Sun Systems—January 1997
13
Undesired Responses From the Tape Library
•
SCSI tape drive
indicates the
st.conf
entry is incorrect. You must edit
the
st.conf
file and reboot until you no longer see
SCSI Tape Drive
.
•
No tape loaded or drive offline
indicates there is no cartridge in
the drive or that the cartridge is not yet loaded. Install a cartridge or wait
for the cartridge load to complete and retry the
mt status
command.
•
No such file or directory
indicates there is no tape drive attached to
that rmt (remote) number. Try another rmt number.
For Information on Software Commands
•
Check the man pages for additional information on software commands.
Type
man mt
to get a listing of numerous helpful commands.
Rebooting the System
Reboot the system so that it will recognize the new tape library:
Table 2
Possible Returned Messages
Message
Meaning
Other tape drive
Indicates that the library
is correctly recognized.
Specific Sense Key returned
Not usually an issue.
No Additional Sense
Indicates that there are
no error conditions.
Unit Attention
Indicates that the drive
has just been powered
on or that a tape has
been inserted.
boot -r
