Sun Microsystems E25544-02, User Manual

Page: 52 / 90

42 Sun Dual Port 10GBase-T Adapter User’s Guide • July 2012
http://support.oracle.com
8. Confirm that the network host files have been configured correctly during the
Oracle Solaris 10 installation.
Although the Oracle Solaris 10 software installation creates the client’s network
configuration files, you might need to edit these files to match your specific
networking environment. See
“Configure the Network Host Files (Oracle Solaris
10)” on page 34 for more information about editing these files.
9. Display the configuration information for all datalinks or the specified datalink.
By default, the system is configured to have one datalink for each known network
device.
Related Information
■
“Create Driver Instance Files (Oracle Solaris 10)” on page 34
■
“Configure the Network Host Files (Oracle Solaris 10)” on page 34
■
“Boot Options” on page 35
■
“Boot Over the Network (PXE)” on page 36
■
“Boot Over a 10 GbE Network (Oracle Solaris x86 and Linux)” on page 36
# dladm show-dev
e1000g0 link: up speed: 1000 Mbps duplex: full
e1000g1 link: down speed: 0 Mbps duplex: half
e1000g2 link: down speed: 0 Mbps duplex: half
e1000g3 link: down speed: 0 Mbps duplex: half
ixgbe0 link: up speed: 10000 Mbps duplex: full
ixgbe1 link: up speed: 10000 Mbps duplex: full