Sun Microsystems Datacenter Switch 3456, Installation Manual, Page: 94 / 125

Chapter 9 Installing Line Cards 79
▼
To Disable Line Cards
●
To disable standby power and IPMB buses for a line card, type this command:
where slot is the slot number of the line card from
TABLE 9-1
.
When a line card is disabled, the Standby LED on that line card goes out.
▼
To Enable Line Card IPMB Buses
●
To enable an IPMB bus on a line card, type this command:
where:
■
slot is the slot number of the line card from
TABLE 9-1
■
bus is either
a
or
b
▼
To Disable Line Card IPMB Buses
●
To disable an IPMB bus on a line card, type this command:
where:
■
slot is the slot number of the line card from
TABLE 9-1
■
bus is either
a
or
b
▼
To Enable Line Card Standby Power
●
To enable standby power on a line card, type this command:
where slot is the slot number of the line card from
TABLE 9-1
.
# disableboard lc
slot
# enableipmb lc
slot bus
# disableipmb lc
slot bus
# enablestby lc
slot