Sun Microsystems Cobalt LX50, User Manual

Page: 73 / 138

Using the Service Partition Menu
User Guide—Sun Cobalt LX50 Server 4-15
Managing Platform Events
The Platform Event Manager (PEM) allows you to configure and manage Platform Event Paging (PEP), Baseboard
1
Management Controller Local Area Network (BMC-LAN) Configuration, and the Emergency Management Port
(EMP).
To use PEM, double-click the Platform Event Manager menu item on the Available Tasks pane of the main SSU
window. The Platform Event Manager main window appears. You can click on the buttons in this window to perform
platform management.
Run System Diagnostic Test
Select Run System Diagnostic test to bring up the Platform Confidence Test menu (see Figure 49).
Figure 49. Platform Confidence Test Menu
You can use this menu to perform the following tests:
• Quick Test
• Comprehensive Test (DEFAULT)
• Comprehensive Test With Continuous Looping
All test results are saved in the
RESULT.LOG
file of the current directory, which is normally
C:\PCT.
This file is
overwritten for each test.
1. Baseboard refers to the Main Board in the server.