Sun Microsystems Blade X6220, Manual

Page: 16 / 34

10 ILOM Supplement for Sun Blade 6220 Modular Server • April 2007
1. Connect a dongle cable directly to the server module.
2. Connect a terminal or terminal emulator to the DB9 connector on the dongle
cable. The dongle cable is labelled “2” in
FIGURE 2
.
The CLI login prompt appears.
3. Enter the the user name and password when prompted.
The default user is
root
and the default password is
changeme
.
The CLI prompt appears.
FIGURE 2
shows the the dongle cable.
FIGURE 2
Dongle Cable
The connectors are:
1. DB9 Serial Console to Service Processor. Use this to connect to the ILOM.
2. VGA Video Connector
3. 310/100 Mbit Ethernet (not supported)
4. Dual USB connector (keyboard/mouse)
TABLE 2
shows the pinouts on the dongle cable DB9 connector.
TABLE 2
Dongle Cable DB9 Pinouts
Pin Signal Description Status
6 COM DSR Not supported
2 COM SIN
7 COM RTS