Sun Microsystems 817-4054-15, Servise Manual

Page: 107 / 204

Chapter 6 Storage Devices 6-21
11. Lift the reader off the locating pins (
FIGURE 6-21
). Place it on an ESD mat.
FIGURE 6-21
Removing the SCC Reader
6.6.2 Installing the SCC Reader
1. Complete Step 1 through Step 6 in Section 6.6.1, “Removing the SCC Reader” on
page 6-18 .
2. Open the media bay access door and loosen the latch securing screw. Release the
latch and lift the cover (
FIGURE 6-14
).
3. Connect the SCC reader cable (
FIGURE 6-19
) to the IB_SSC board.
4. Place the reader over the locating pins. Press firmly to seat it (
FIGURE 6-21
).
5. Tighten the captive screw (
FIGURE 6-20
).
6. Close and latch the media bay access door.
7. Remove the wrist strap.
8. Slide the system into the system cabinet and secure it.
See Section 3.1, “Sliding the System Out of the System Cabinet” on page 3-1 .