■
If a mechanical lift is not available, remove the power supplies, SIM boards and hard disk
drives to reduce the weight, see Disk Shelf Maintenance Procedures for instructions.
Use one of the following racks for the Sun Disk Shelf:
■
Sun Rack 900/1000 cabinet
■
Sun Fire cabinet
■
Sun StorEdge Expansion cabinet
■
Sun Rack II 1042/1242 cabinet
■
Any 19-inch wide, 4-post, EIA-compatible rack or cabinet with a front-to-back depth
between vertical cabinet rails of 61 cm to 91 cm (24 in. to 36 in.). The cabinet can have
threaded or unthreaded cabinet rails.
Position the rack where the shelf is to be installed adjacent to the rack where the controller is
installed, if separate. Stabilize the cabinet and lock the casters.
Tasks
Sun Disk Shelf Tasks
▼
Installing the Sun Disk Shelf into the Rack Slide Rails
Starting at the bottom of the cabinet, locate the appropriate rack unit (RU) height. Install Disk
Shelves below controllers to prevent rack from tipping. The Sun Disk Shelf requires four
standard mounting units (4RU) of vertical space in the cabinet.
1
Sun Disk Shelf
Sun ZFS Storage 7120, 7320, and 7420 Appliance Installation Guide • December 2012 E38245–01
46
Summary of Contents for 7120
Page 8: ...8 ...
Page 53: ...fig 2 Sun ZFS Storage 7120 with two disk shelves 7120 Cabling Chapter 3 Cabling 53 ...
Page 140: ...140 ...
Page 156: ...156 ...
