■
Stand-alone Application Server installations:
install-dir
/nodeagents/
nodeagent_name
/i1/logs
/access/server_access_log
install-dir
/nodeagents/
nodeagent_name
/i2/logs
/access/server_access_log
5. Add a name and value pair (
Name=Name Value=Duke
) for storing in
HttpSession
.
6. Click the “Add to Session Data” button.
7. Verify that the session data was added
In this section you created an instance to use as a load balancer and set up a load
balancing configuration. You also verified load balancing.
To configure and verify HTTP session failover, continue to
Chapter 2
. Otherwise
continue on to
“Cleaning Up” on page 22
.
Cleaning Up
To clean up, you can uninstall the Application Server installation by completing the
steps in
“To Uninstall Completely” on page 22
, or you can simply delete the sample
cluster you have just created by completing the steps in
“To Remove the Sample
Cluster Only” on page 23
.
Caution –
If you plan to complete
Chapter 2
do not use these clean-up procedures.
Instead, go to
Chapter 2
now and when you are done use the procedures you’ll find
there to clean up.
▼
To Uninstall Completely
To completely uninstall Application Server and also uninstall the Web Server, use the
following procedure.
1. Stop the Application Server processes using these commands:
asadmin stop-cluster FirstCluster
asadmin stop-node-agent hostname
asadmin stop-domain domain1
Next Steps
Steps
22
Sun Java System Application Server Enterprise Edition 8.1 2005Q2 Quick Start Guide
