Sun Microsystems 1.0, User Manual

Page: 41 / 182

Installing SunFDDI/P Software 15
3
(See Chapter 11, “Setting Up Servers and Diskless Clients” for more
information on booting diskless clients across an FDDI network.)
The number of SunFDDI/P interfaces found is displayed and you are asked
how many interfaces you want to configure.
2. Enter a number from 1 to 16 or press Return for the default.
3. Type the host name for which you want the interface associated.
4. Type the IP address that corresponds to the host name or press Return for
the default IP address.
If an IP address is already associated with the host name (either in the
NIS/NIS+ database or in the
/etc/hosts
file) the script offers it as a
default IP address. You must assign a unique IP address to each SunFDDI/P
interface. If you have multiple IP interfaces installed on one machine, each
interface must be attached to a different FDDI subnetwork.
5. Repeat Steps 3 and 4 until you have assigned a host name and IP address
for each SunFDDI/P PCI card installed in your machine.
6. Indicate whether you want the SunNet Manager agents for SunFDDI/P to
start when you reboot the machine.
•
Type
y
to start the SunNet Manager agents for SunFDDI/P.
Is this install for a diskless client [n] [y,n,?]
How many FDDI (pf) interfaces do you want to configure?
What host name do you want to use for interface 1: hysop-pf
What ip address do you wish to use for hysop-pf [
<ip_address>
]: