background image

(When connected to the T-Max® Manager or T-Max® 1A or 3A.)

1

If the remote system has been set to allow a pre-tanning delay time,
the timer display (A) will repeatedly flash the delay symbol “dL” and
then the remaining delay time. Press the timer button (B) or wait until
the delay time has expired to begin the tanning session. The lamps
will turn on and the timer will begin to count down.

2

Lift the canopy, lie down on the bench (face up) and lower the
canopy as close to your body as possible.

3

When the timer reaches “0” the lamps turn off. If you want to stop
your session before time expires, press the stop button (C).

4

Raise the canopy by using the outer edge of the canopy, do not
push up on the acrylic shield as it may crack. The cooling fans run
for three minutes after the lamps shut off to aid in cooling the
sunbed. The timer will indicate “..” as a reminder to clean the
sunbed. After the sunbed is cleaned press the timer button and the
display will return to “0”.

27356-02A -  Page 5

(When used without remote or when connected to a remote system
using a control relay)

1

Press the timer button (B) to begin the tanning session. The timer dis-
play (A) displays the remaining time. The lamps will turn on and the
timer will begin to count down from the maximum tanning session
time. If a tanning time less than the displayed time is desired repeat-
edly press the timer button (B) to decrease the remaining time.

2

Lift the canopy, lie down on the bench (face up) and lower the
canopy as close to your body as possible.

3

When the timer reaches “0” the lamps turn off. If you want to stop
your session before time expires, press the stop button (C).

4

Raise the canopy by using the outer edge of the canopy, do not
push up on the acrylic shield as it may crack. The cooling fans run
for three minutes after the lamps shut off to aid in cooling the
sunbed.

A Timer display

- Displays remaining time.

B Timer button

- Turns bed on. Timer dis-

play shows remaining time. If a lesser
time is desired, press timer button
until desired time is displayed.

C Stop button

- Interrupts tanning session.

Operation

A

B

C

Using Your Sunbed

Before using your sunbed, please note the following:

• Your skin should be free of cosmetics, tanning oils, or other body

lotions prior to tanning except for those specifically made for use
with tanning devices. However, do not remove natural body oils by
bathing or showering immediately before tanning.

• Keep treated hair from contacting sunbed surfaces. Many hair prod-

ucts can damage the sunbed acrylic. Wear a shower cap or towel if
you use gels, mousses, sprays, or other hair products.

• Your sunbed is designed for individual use. Always wear the safety

goggles supplied with your sunbed or another approved pair of gog-
gles, as defined under 21 CFR 1040.20. Regular sunglasses do not
provide adequate protection from ultraviolet light.

RECOMMENDED EXPOSURE TIMES IN MINUTES

Level 1/Week 1

Level  2

Level  3

Level  4

Subsequent

Skin Type: 1st-3rd Sessions

Maximum

I   

Sensitive

NOT RECOMMENDED FOR TANNING

II  

Light

3

6

9

12

15

III

Normal

4

7

11

15

15

IV

Dark

5

9

13

15

15

MAXIMUM EXPOSURE TIME IS 15 MINUTES

Exposure Times

Follow the guidelines for skin type and exposure times as shown in the
table below. Untanned persons should not tan on consecutive days
during their first week of tanning. Never tan more than once a day.
Tanning normally appears after the first few sessions and maximizes
after approximately four weeks. Tan once or twice per week thereafter
to maintain appearance. Persons already having a base tan may begin
at advanced levels corresponding to the extent of their base tan.

Skin Type:

I

Sensitive Skin

(Burns easily and severely and does not tan.)

II

Light Skin

(Burns easily and severely and tans minimally.)

III

Normal Skin

(Burns moderately and tans average.)

IV

Dark Skin

(Burns minimally, tans easily and above average.)

Summary of Contents for 24 XS Power









Reviews:

Related manuals for 24 XS Power