Sumo ST390, Operation Manual

Page: 8 / 8

WebDT Mobile Tablet Barcode Scanner Operation Guide
HyperTerminal
www.sumotech.com
HyperTerminal
HyperTerminal
You also can connect Barcode Scanner/MSR from HyperTerminal :
1. Run Start l All Programs l Accessories l Communications l HyperTerminal to run the
HyperTerminal.
2. Input a connection name in “Connection Description” window.
3. Choose the connection port (please refer to the parameters table
of each module), then click OK.
4. Change the port Properties (please refer to the parameters table
of each module), then click Apply to complete the settings.
5. If the settings are all correct, HyperTerminal will be connected to
the module. Scan a barcode or swipe a card, the captured data
will display in the HyperTerminal windows.
6. Verify the captured data.
SUMO ST390 OPERATION GUIDE
D