4.0 Operation and Adjustment
4.1 Operation
The top link should be as short as possible whilst remaining as close to horizontal as is achievable. It is
important to ensure the machine is running level to allow the optimum level of soil disturbance as well as
to prolong the life of the wearing parts.
Bearings should be greased (see 5.0 Maintenance); stands must be in the raised position and all relevant
pins in the correct holes prior to commencing work.
Forward working speed should be governed by the local conditions as well as the finish produced by the
Sumo Mixidisc
4.2 Adjustments
To adjust the disc working depth, the weight must first be taken off the packer arms before the lynch pins
and depth pins are removed. A new depth position can then be selected by replacing the pins in higher or
lower holes. The disc unit slices, mixes and cultivates the top 50 - 100mm of soil.
Page 7
Summary of Contents for Mixidisc
Page 2: ......
