Summit Z Beam Shelving, Assembly Instructions Manual, Page: 1 / 8

100 – 102 Kirkham Rd West, Keysborough, 3173 VIC
Ph: 1800 352 999 W: www.summit.com.au
Assembly Instructions
Z Beam Shelving
Please read instructions COMPLETELY prior to assembly
Caution

Keep small children clear during assembly.

Handle components with care due to sharp edges.
Tools Required

Rubber Mallet or Hammer.
Helpful Hints

Use a cloth or wooden block to protect the components when hammering.

Hammer gently to avoid component damage.

Drive rivets to the bottom of the keyhole by striking the beam near the joint.
Recommendations

Wear gloves during assembly.

Two persons assemble the unit.

Assemble the unit on solid level surface.

Heaviest items to be loaded on lower shelves.

Loads to be evenly distributed.
Parts List
A – Uprights (8) B – Long Beam (10) C – Short Beam (10)
D – Shelf Deck (5) E – Post Cap (8) F – Post Joiner (4)
G – Post Clips (2)