background image

 

 

IMPORTANT SAFETY INSTRUCTIONS 

WARNING

  

To reduce the risk of fire, electrical shock or injury when using 

your appliance, follow these basic precautions 

  Read all instructions before using the appliance. 

 

Plug into a grounded 3-prong outlet.    Do not remove grounding prong, do not use an adapter, 

and do not use an extension cord. 

 

It is recommended that a separate circuit, serving only your appliance, be provided. Use 

receptacles that cannot be turned off by a switch or pull chain. 

 

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or 

explosion. 

 

Before proceeding with cleaning and maintenance operations, make sure the power line of 

the unit is disconnected. 

 

Do not connect or disconnect the electric plug when your hands are wet. 

 

Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so 

can result in electrical shock or death. 

 

Do not attempt to repair or replace any part of your appliance unless it is specifically 

recommended in this manual. All other servicing should be referred to a qualified technician. 

  Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or 

any other appliance. The fumes can create a fire hazard or explosion. 

 

Use two or more people to move and install the appliance. Failure to do so can result in back 

or other injury. 

 

To ensure proper ventilation for your appliance, the front of the unit must be completely 

unobstructed. Choose a well-ventilated area with temperatures above 61

°

F (16

°

C) and below 

95

°

F (35

°

C). This unit must be installed in an area protected from the elements, such as wind, 

rain, water spray or drips. 

 

The appliance should not be located next to ovens, grills or other sources of high heat. 

 

The appliance must be installed with all electrical connections in accordance with state and 

local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in 

accordance with the National Electrical Code and local codes and ordinances, is required. 

 

Do not kink or pinch the power supply cord of the appliance. 

 

The fuse (or circuit breaker) size should be 15 amps. 

 

It is important for the appliance to be leveled in order to work properly. You may need to make 

several adjustments to level it. 

 

Although the unit has been tested at the factory, due to transit and storage, you should clean 

the appliance before use. 

 

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may 

damage or discolor the interior. 

 

Do not use this apparatus for other than residential purposes. 

 

Summary of Contents for SWC1840









Reviews: