9
ECO mode:
•
Press and hold the button
for 3 seconds to enter or exit ECO mode.
•
In this mode, the interior LED light, the compressor indicator
and the temperature value
on the display panel will be turned off and the
°
symbol will be illuminated in the upper left
corner when the temperature is being displayed.
Light / Lock
•
LED lamp brightness mode: with Memory IC (when the unit restarts after power failure unit, it
will auto recover to the last setting), the default brightness is 100%. Each time the button
is pressed, the brightness of the LED will be cycled through the four positions (100%,
75%, 50%, OFF)
•
Press and hold for 3 seconds to lock or unlock the control panel.
ON/OFF Power
/ Mute
•
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
•
When the high/low-temperature alarm is activated, the buzzer will sound continuously. Press
once time to turn off the alarm.
LOCK
If illuminated, this indicates the control panel is locked.
RUN
When the unit’s compressor is running, this indicator light will illuminate to signify that cooling
mode is currently in operation.
Demo mode
•
Press and hold buttons
,
and
simultaneously for 10 seconds to enter or
exit demo mode.
•
In this mode, the display panel can operate settings, but the temperature is a fixed display of
12°C (54°F), and all fans, including, the compressor will not start.
Sabbath mode
•
Press and hold buttons
and
at the same time for at least 5 seconds to enter or exit
Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, and
interior lights and prevents them from turning on again. Normal cooling operations will still
take place. The compressor and the fan work normally.
While the cabinet’s power is off, it will not automatically exit Sabbath mode, and it will keep
Sabbath mode when it powers on again. The Sabbath Mode will automatically turn off after
96 hours.
Defrosting
•
This unit defrosts automatically in normal operating conditions.
•
The evaporator behind the rear wall of the unit defrosts automatically. Water will drain
through the drainpipe from the back of the product. Users need to bring the water to the drain
or find an appliance to load the water. (If loading with an appliance, you need to pay attention
to clearing the water regularly)
•
However, frost may accumulate on the evaporator if the unit is repeatedly opened in high
heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will
require manual defrosting.
Mandatory
defrost mode:
Press the
and
at one time for 10 seconds to enter compulsory defrost mode.
Summary of Contents for SPR623OS
Page 13: ...13 NOTES...
