background image

 

IMPROPER USE:  SUMMIT assumes no liability for parts or labor coverage for component failure or 
other damages resulting from improper usage or installation or failure to clean and/or maintain product 
as set forth in the warranty packet provided with the unit.  

 

ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR 
INSTALLATION, FIRE, FLOOD, ACTS OF GOD:  SUMMIT is not responsible for the repair or 
replacement of any parts that SUMMIT determines have been subjected after the date of manufacture 
to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act 
of God.  

 

IMPROPER ELECTRICAL CONNECTIONS:  SUMMIT is not responsible for the repair or replacement 
of failed or damaged components resulting from electrical power failure, the use of extension cords, 
low voltage, or voltage drops to the unit.  

 

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE:  There are no other warranties, expressed, implied or statutory, except the parts & labor 
warranty and the extended compressor warranty specifically described above.  These warranties are 
exclusive and in lieu of all other warranties, including implied warranty and merchantability or fitness 
for a particular purpose.  There are no other warranties which extend beyond the description on the 
face hereof.  

 

OUTSIDE CONTIGUOUS UNITED STATES:  This warranty does not apply to, and 

SUMMIT

 is 

not responsible for, any warranty claims made on products sold or used outside the Contiguous 
(48) United States. To be clear, this warranty excludes the states of Alaska and Hawaii and all 
off-shore territories. 

REQUESTING SERVICE 

If you are in need of service, please either fill out a service request on our website, 
http://www.summitappliance.com/support, or call us at 800-932-4267 or 718-893-3900.  Please be prepared to 
give us the following information: your name, address, phone, email, model, serial, date of purchase, place of 
purchase, and the problem you are having.

 

 

 

 

 

 

 
 
 
 
 
 
 

 

14

WARNING! 

 This product may contain chemicals known to the state of California 

to cause cancer or birth defects or other reproductive harm. For more information, 
visit: www.summitappliance.com/prop65 

Chemicals known by the manufacturer to be present in this product in concentrations 
higher than threshold limits:   NONE.

Printed in Mexico

Summary of Contents for SCR1505















Reviews: