10
13. Fit the accompanying left-side
top hinge. Tighten the tosion spring
approx. 1/2 turn (anticlockwise on
left side, clockwise on rigth.)
14. Secure the top hinge in
position.
15. Raise the appliance into
uppight possion. Click the top
panel into place (it is secured in
three places.)
16. Retighten the top panel
screws using a screwdriver.
17. Refit the lock housing and
lock pin.
18. After reversing the door, it is important to check that the sealing gasket provides a tight
seal all the way round. If it does not, carefully heat the gasket evenly with a hair dryer. Then
ease the gasket outwards slightly so that it forms a tight seal against the cabinet. Be careful
not to heat the gasket so much that it melts!
ADJUSTMENT OF THE DOOR
(if necessary)
Summary of Contents for SCR 1150
Page 30: ...Empty page ...
Page 31: ...Empty page ...
