d. Place the CO2 tank and CO2
regulator valve component
into the cabinet and fix the
CO2 tank with tank bracket
and retainer
(See Figure 8).
3. Install the beer keg:
Note:
This unit can hold two one-sixth barrel kegs, but not a full-size keg.
Place the beer keg into the cabinet and firmly connect the ke
g’s opening to the
connection port of the mixed ball valve.
Note:
To place a keg into the cabinet, use the keg handle to move the keg
to the front of the open beer dispenser, then carefully tip the keg so that
the raised bottom edge contacts the edge of the cabinet. Finally, lift the
keg handle to raise the keg to the level of the floor of the cabinet and
push the keg into place.
4. Install tap handle and beer tap:
Screw the tap handle clockwise into the beer tap to make a firm connection. Then
connect the tap to the beer tower components and tighten with a wrench (See
Figure 9).
Notes:
When replacing the beer keg, first turn off the safety switch on the CO2
regulator valve and remove the mixed ball valve to take out the keg.
When replacing the CO2 gas cylinder, remember to turn off the main switch
of the CO2 gas cylinder and the safety switch on the CO2 regulator valve.
Afterwards, use a wrench to loosen the hexagonal nut port connecting the
CO2 regulator valve with the CO2 tank. Then, using a wrench, remove the
fixed bolt of the CO2 tank to take out the CO2 tank.
During the installation process, be sure that all parts are connected
tightly and that there are no gas leaks.
When connecting the hose to the connection port, you can dip the ends
into warm water to make the connection easier.
If the high-pressure compressed gas in the CO2 tank is not handled properly,
it could be dangerous:
a. Make a note of the D.O.T. testing date on the cylinder neck before
installation. If it is more than 5 years old, don
’t use the product. Return it
to the gas supplier.
b. Keep gas cylinder away from heat sources. Unused cylinders should be
placed upright in a cool, ventilated place (preferably at 70
ᵒF).
A Note about Freestanding Installation
If you decide to install your beer cooler in a freestanding position (rather than built-in)
you will need to order a special kit, which includes a guard rail and a set of casters.
Call our Customer Help Line at
1-800-287-8799
weekdays between 8:30am and
5:00pm ET.
12
Summary of Contents for SBC56ADA
Page 19: ...6 Notes 18...
