background image

LOCATION OF PARTS 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

 
 
 
 
 

INSTALLATION 

 

PLACEMENT 

 

The freezer should not be placed in direct sunlight or close to heat sources such as 
oven, grill, radiator, etc.  Also avoid locations where the unit will be exposed to 
moisture or can be easily splashed. 

 

Place the unit on a firm flat surface. An uneven floor will cause vibration and noise. 
Adjust leveling legs in front until freezer is level. 

 

Good ventilation around the freezer allows heat to escape smoothly, improving 
cooling efficiency and saving energy.  To maintain high operating efficiency, do not 
place anything on top of the freezer. 

 

Allow at least 4 inches of space at the back and sides of the freezer, which allows 
the proper air circulation to cool the compressor.  This improves cooling efficiency 
and saves energy.  Leave at least 1¼"

 

of space above the freezer. 

 
 
 

  1¼" 

 
 

Minimum clearances for sides and top 

 
 

4" 

 4" 

 
 
 
 
 
 

  Position the appliance in such a way that the plug is accessible 

  After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 

hours before placing food into the freezer. 

 

4

Summary of Contents for FS22L













Reviews: