Maintenance and Cleaning
Manual Defrosting of the All-Freezer
When the frost and ice layer in the freezer is 1/8” thick you should clean the
freezer.
•
First turn the thermostat knob to the STOP (0) position and disconnect the
power supply. Empty the compartment and make sure that the packages
remain frozen.
•
Place a suitable vessel under freezer to collect the defrost water. Leave the
freezer door open to accelerate defrosting.
Cleaning the Appliance
Disconnect the power supply
before cleaning the appliance. Do not use coarse or
Aggressive cleaning agents as you can damage the surface.
•
Clean the
exterior
with water and detergent. Varnished surfaces are
cleaned with soft cloth and an alcohol based cleaning agent (for example
glass cleaners). You may also use alcohol (ethanol or isopropyl alcohol).
The application of abrasive and especially aggressive cleaners, such as
stainless steel cleaners, is not appropriate for the cleaning of plastic and
coated parts.
•
Remove the detachable accessories in the interior of the appliance and
clean it with water and liquid detergent. Plastic parts cannot be washed in
a washing machine.
•
Wash the interior of the appliance with lukewarm water, in which you add
one or two spoonfuls of vinegar.
•
Every now and then wipe the condenser on the rear wall. Use a soft non-
metal brush or vacuum cleaner.
•
Do not forget to clean the defrost water receptacle above the refrigerators
compressor (do not remove the receptacle). After cleaning, connect the
appliance to the power supply and reload the packages.
•
Clean the drain pan on the refrigerators compressor, but do not remove the
drain pan.
After Cleaning, connect the appliance into the power supply and reload the
packages.
Instructions for Use
