6
OPERATION
The appliance should be placed where the ambient temperature is between 10~38°C (50~100°F). If the
ambient temperature is above or below this range, the performance of the unit may be affected. Placing your
unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Connect power cord to a properly grounded outlet.
This appliance is equipped with Memory IC – should there be a power interruption, unit will auto recover at
last setting.
Control Panel:
ON/OFF Power
To turn the left zone (freezer section) on or off, press and hold the
button for 3 seconds on the left.
To turn the right zone (refrigerator section) on or off, press and hold the
button for 3 seconds on the right.
Setting the temperature Control
Each cooling compartment of the appliance (left and right) is independently controlled. To set the temperature:
Left zone adjustable temperature: -30°C to 8°C ( -22°F to 46°F )
Right zone adjustable temperature: 2°C to 8°C ( 36°F to 46°F )
Set the desired cooling temperature by pressing the corresponding button
SET
. Each depression of the
buttons will lower the temperature setting by 1 degree. The temperature selected will flash in the LED display
for approximately 5 seconds, then revert back to displaying the temperature of the cabinet interior.
°C/°F
This unit may have the option to display temperatures in either Fahrenheit or Celsius. To change the setting,
press and hold both buttons (SET Left / SET Right) simultaneously for approximately 5 seconds. A prompt (beep)
will sound and the blue pilot light adjacent to the
°F
or
°C
mode will illuminate.
Interior Light
You can turn the interior light ON or OFF by pushing the ”
LIGHT
” button. The light will turn off automatically if it
remains ON for 10 minutes. To turn the light back on, push the ”
LIGHT
” button again.
"Fast Freeze" Function
If you press and hold the
°
C/
°
F button for 3 seconds, the unit will enter the “Fast Freeze” mode. In this mode,
press the
LIGHT
buttons to set the fast freezing time. The setting time range is 1 to 10 hours, and the default
setting time is 3 hours. If you set the fast freezing time longer than 4 hours, the unit will defrost itself at the end
of the “Fast Freeze” cycle. To stop the “Fast Freeze” function, again press the
°
C/
°
F button and hold it for at
least 3 seconds.
