INSTALLATION INSTRUCTIONS
BEFORE USING YOUR REFRIGERATOR
•
Remove the interior and exterior packaging
•
Before connecting the appliance to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
Tips for Energy Savings
•
Try not to open the door too often, especially when the weather is hot
and humid. Once you open the door try to close it as soon as possible.
•
Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
•
Set thermostat from higher to lower settings as soon as possible
(depending on how loaded the appliance is, the ambient temperature
etc...).
•
The coils on the rear of the refrigerator should be cleaned and free of
dust or any other impurities.
•
Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 1/8” thick.
•
Always consider instructions stated in sections Positioning and Energy
Saving Tips, otherwise the energy consumption is substantially higher.
•
Do not place hot foods in the refrigerator.
•
A cool dry place allows your refrigerator to operate more efficiently so
keep the refrigerator away from stoves and other heat sources.
Instructions for Use
