background image

 

6.  Screw the alternate left top hinge (7), included in the fittings, 

on the left hand side of cabinet. (Fig. 4)

 

7.  Relocate  the  door  to  the  designated  position.  Then  screw  the  bottom  hinge  assembly  on  the  left 

designated position and tighten it. Reinstall the plastic cover. (Fig. 5) 

8.  Recheck and adjust the door alignment by loosening the screws (5) and moving the door adapter (4). 

Tighten the screws (5) after the door is leveled. (Fig. 5) 

9.  Remove the handle from the left side of the door and install it on the right side. (

See next section

.) 

 

INSTALLING THE STAINLESS STEEL AHNDLE 

This appliance includes a stainless steel handle that is not required to 
operate the unit. To install the handle, follow the instructions below: 

 

1.  Use a screwdriver to remove the screws on the side of door 

where the handle is to be installed.   

2.  Align the handle with the screws removed in step # 1.  Tighten the 

screws using a Phillips head screwdriver until the handle is both 
flush and secured tightly against the door side. (DO NOT over-
tighten as this will cause damage to the stainless steel door 
surface.) 

 
 
 

 
 

OPERATING YOUR APPLIANCE

 

 

It is recommended that you install the appliance in a place where the ambient temperature is between 72º 
and 78ºF (23º-26ºC).  If the ambient temperature is above or below the recommended temperatures, the 
performance of the unit may be affected.  For example, placing your unit in extremely cold or hot 
conditions may cause interior temperatures to fluctuate. The operating temperature range may not be 
reached. 
 

CONTROL PANEL 
 

 
 
 
 

 

 
 
 
 
 

ON/OFF Power 

To turn the appliance ON or OFF, press the  

  symbol and hold for 5 seconds. 

NOTE: Pressing this 

POWER

 key once can switch off the audible alarm when the alarm is on. 

 

 

Handle

Door

Screw

 

Summary of Contents for FFAR121SS7

















Reviews: