Summit FF711ES, User Manual

Page: 10 / 16

7
REVERSING THE DOOR SWING
Refer to the disassembly diagram, and change the door hinges in the following procedure. The
numbers in the diagram indicate the procedure order in the instructions.
1. Remove the hinge cap by twisting it off.
2. Remove the upper hexagonal head screws. The top hinge and the freezer door can now be
removed.
3. Remove the middle hexagonal head screws. The middle hinge and the refrigerator door can now
be removed.
4. Remove the cover for the middle hinge holes, and re-attach it symmetrically to the holes on the
other side.
5. Tilt the refrigerator back or lay it on its back for steps 6, 7, and 8. Use a pad or blanket to protect
the floor and to avoid scratching the painted finish.
6. Remove the leveling legs by turning them counterclockwise. Remove the lower hexagonal head
screws, two on the hinge side and one near the front corner of the other side.
7. Attach the bottom hinge symmetrically to the other side of the cabinet with the screws removed
in step 6. (Do not tighten the screws completely.)
8. Attach the left side leg and the leg spacer to the other side hole when was positioned
symmetrically.
9. Remove the upper hinge plastic pins, and insert them in the holes from which the screws were
removed in step 2.
10. Take off the hinge collar caps from both the freezer and refrigerator doors using a screwdriver
and insert them in the hinge collars on the opposite sides.