15
Display “E0”,
“E1”. “E2”,
“E3”, “E4”,
“E5” or “E7”.
•
“E0”indicates the communication error
for 3 zone models.
•
“E1” or “E2” indicates that the air
temperature sensor has failed.
•
“E3” or “E4”indicates that the defrost
sensor in the evaporator has failed.
•
“E5” indicates defrost heater failure.
•
“E7” indicates door switch failure.
•
Call for service.
The alarm
sounds and
the
temperature
display
flashes.
Has a drawer been open for longer than 60
seconds? If not, then the temperature has
risen higher or fallen lower than the
temperature that has been set. This could
be due to:
•
The appliance drawers being opened
too often.
•
The ventilation opening being covered
or too dusty.
•
A lengthy interruption in the power
supply.
•
A large amount of food has been added
to the unit.
If yes, close the drawer.
•
Do not open drawers more often than
necessary.
•
Clear the obstructions and clean off
the dust.
•
Leave the appliance to work for a
while until the set temperature has
been reached.
The icon “--” is
lit and flashing
in the
temperature
display.
•
The display temperature is out of range.
•
Only temperatures within the range
0~99°F/-9~37°C for FF642D and the
range -49~99°F/-45~37°C for
SCFF532D can be displayed. If the
temperature is not within this range,
the icon “--” will be displayed instead.
This is normal.
If you've checked the table above and find that you still need help with your appliance, call our Customer
Service facility at
800-932-4267
between 9:00AM and 5:00PM ET. We will do our best to answer your
questions.
